Removing gasoline from your lawn mower is an easy task when you know the specific techniques. Are you worried about how to remove gas from lawn mower? Almost everyone needs to remove gas from their lawnmower at the end of the season.
It will improve your lawnmower’s health to remove gas from them, because when you don’t remove gasoline from a lawnmower, then it can cause damage to the engine. When you completely empty the gas tank then the chances of clogging in the fuel system and rusting issues will be reduced.
We outline some important tips which give you an understanding that how to remove gas from lawn mower in an easy way. Let’s get into the further details!
Contents
Tools Required For Removing The Gasoline From Lawn Mower
When you have all tools with you then your task of removing gasoline from the fuel tank will be more easy and simple. The details of these tools are listed below:
- Hedge trimmers
- Leaf blowers
- Chainsaws
- Short plastic hose
- Long plastic hose
- Empty can with a cap.
- Siphon pump
Moreover, make sure that you need to empty the gas tank for 3 weeks of storing your lawn mower. In this way, it will dry and you can check the condition of the gas tank before storing it.
7 Best Ways: How To Remove Oil From Lawn Mower?
Keep in mind that old gas is not good for any of your lawnmowers. When you don’t remove the gas from the lawnmower, then gas particles start to sinking which can surely damage your mower engine. Make sure to gather all the tools with you to remove gasoline from the mower.
Step 1: Let Cool Down Your Lawn Mower
It is necessary to cool down your lawn mower before removing the gas. Otherwise, it can damage you as well as it is dangerous to touch the hot engine.
Step 2: Use Siphon
Removing gas from the lawnmower is easy when you use a siphon pump. Make sure to put the jerrycan next to the tank cap. Furthermore, it is important to check the hose because the hose always is lower than the fuel level. This tip will ensure that gas keeps flowing when you start the mower.
Step 3: Put Hose Deep Into The Gas Tank
Make sure to put a hose deep in the lawnmower gas tank. You need to carefully blow into the hose when you are especially checking the long hose is submerged. When you hear the bubbles sound then it means it is placed correctly.
Furthermore, you need to place the other side of the hose into the empty can and place the short end of the hose next to the opening. Bear in mind that the short hose is too far that it will not submerge, so avoid pushing it.
Step 4: Close The Opening
You can use cloth and make sure to check that no air is escaping. If you think that air is escaping, then you can use a wet cloth for this purpose. Keep in mind that a damp cloth makes your work easier in order to seal the hole completely.
Step 5: Blow Air Into Short Hose
For this purpose, you can also use your air compressor which can complete air-blowing tasks for you. Keep in mind that you need to cover your face, otherwise gasoline fumes can harm you. You need to continue blowing until the gas flows directly to the vacant jerrycan. You just need to start this blowing process and the rest will be done by gravity.
Step 6: Remove The Siphon Pump
Make sure to softly remove the siphon pump, when the jerrycan is got all your lawnmower gasoline. It is necessary to close the jerrycan because it gives off fumes that are harmful in the open air.
Step 7: Clean Up All The Thing
You need to clean all the parts of the lawnmower before storing it. Also, you need to start the lawnmower until the residual gasoline is finished.
Conclusion
Removing oil or gas from the lawnmower is important because it will keep your mower safe. When you don’t remove the gas from the mower before storing it then it will reduce the shelf life of the lawnmower and also cause other major problems.
With the above-listed points, you get an understanding that how to remove old gas from lawn mower. Furthermore, make sure to gather all the tools which make your task easier.