Most people think that maintaining their lawnmowers is a difficult task. Generally, when you know the basic things about your lawn mower then it will be easier for you. Do you know how to replace the pull cord on lawn mower? If not, then don’t worry because here you will get detailed information through which you can easily replace the pull cord of your desired lawn mower.
Keep in mind that most lawn mower brands such as Honda, Toro, Husqvarna, and many other brands have a different process for maintaining a lawn mower. But all these lawn mowers have somehow similar in replacing pull cords on lawn mowers. Let’s directly get into the depth details of how to replace the pull cord on the lawn mower!
Contents
Why Do You Need To Replace The Lawn Mower Pull Cord?
With multiple ways, you can easily change/replace the pull cord of a mower. But make sure to wear protective gloves and goggles while starting to replace the pull cord of a lawn mower. Furthermore, the process of changing the pull cord on a lawn mower are vary from lawn mower model to model.
Keep in mind that the standard way to replace the pull cord of a lawn mower is to reach only the pulley which is located inside the starter assembly. The pull cord of a lawn mower can break down if its get too old or also it can stuck inside the pulley of the lawn mower.
Tools Required while Replacing Pull Cord On Lawn Mower
Are you worried that how to replace the pull cord on a lawn mower? When you have the below-listed tools with you, then replacing the pull cord on the lawn mower process will be easier for you. Make sure you have gathered all the listed tools with you when you start replacing the pull cord on the lawn mower,
Tools:
- Lighter
- Screwdriver
- Nut Driver
- Scissor
- Needle Nose Pliers
- Protective Gloves
Supplies:
- Lawn mower pull cord with the same model number
- Water and cleaning wipes or rag
7 Best Steps To Replace Pull Cord Of A Lawn Mower
With the below-listed steps, you can easily replace the pull cord of a mower of any brand. Make sure to wear protective eye-googles and gloves before starting this process.
1. Lawn Mower Starter Housing
It is necessary to locate the lawn mower starter housing because when you know this, then you can easily unscrew it. Keep in mind that starter housing is located on the top of your lawn mower. Moreover, you also find there 2 or 4 screws which hold it on the top. You need to smoothly unscrew these bolts.
2. Remove Start Housing With A Great Care
After removing bolts successfully, you need to place the lid of your lawn mower model in the safest place. Make sure to clean the debris if any such as twigs, grass, and other dirt which are stuck under the cap.
3. Carefully Remove The Old Pull Cord
Now, you need to locate the reel which is in the center of the lawn mower starter housing. Keep in mind that in this step you can easily find the broken end of your pull cord if the pull cord is old and broken. You need to gently use your hands to turn it.
4. Check The Old Pull Cord
This is the step in which you will get an idea that what is the length of your old pull cord. You can place both old and new pull cords in the same place, then you can easily cut the new pull cord to the same length as the old pull cord. Furthermore, with this step, you can easily cut a new pull cord now. Cutting an additional inch will not be a big deal, but keep in mind that full foot length can cause a problem. Also, you can use a lighter to seal off any kind of frayed edges, after you successfully cut.
5. Tie The New Pull Cord
Make sure to tie your new pull cord into the recoil device and unwound it only in the opposite direction. Also, it is necessary for you to tie a knot at the end of the part.
6. Test Your Lawn Mower When Reassemble Is Complete
You need to re-screw the lawn mower start house. Add all the bolts and cap which you took it apart. Furthermore, it is necessary to check the ripcord of your lawn mower which ensures that your lawn mower is assembled perfectly.
7. Make Sure Your Lawn Mower Is Not Hot
Give some time if the lawn mower engine is hot. Sip some water and now you are ready to start your mowing task again!
Conclusion
Changing the pull cord is now easy for everyone, especially when you know how to replace the pull cord on a lawn mower. The above-listed steps will help you to replace the pull cord of a lawn mower within a lesser time. Moreover, it is also necessary for you to wear protective eye goggles and gloves before starting to change the pull cord of a lawn mower.